Install IPTV Smarters Pro on Samsung & LG Smart TV

To install IPTV Smarters Pro on Samsung and LG Smart TVs, a special method is necessary for 2026 since the application is not found in the official Tizen or webOS app marketplaces. The procedure is entirely achievable, however. Our team confirmed these steps firsthand using a Samsung QN85B (Tizen 6.5) and an LG C2 OLED (webOS 22), creating the most straightforward instructions possible. This guide offers comprehensive coverage for both platforms, from a 2018 Samsung model to the latest LG OLEDs. To learn more about the application, we recommend reading our complete review of IPTV Smarters Pro first. You can also find supported devices and download resources on the official IPTV Smarters Pro website.

Prerequisites for Setup

Before you begin the sideload process for the IPTV Smarters Pro Smart TV app, it's crucial to have all the necessary components prepared. Any missing item will halt your progress.

• Samsung or LG Smart TV - A Samsung model from 2018 or later running Tizen OS 4.0+ (such as the NU, RU, TU, QN, or S-series) or an LG model from 2018 or later with webOS 4.0+ (including OLEDs from the C, G, B, A-series and NanoCell TVs).
• Windows or Mac computer - This device must be on the identical Wi-Fi network as your television.
• Active IPTV subscription - You will need your M3U playlist URL or the Xtream Codes credentials (username, password, and server URL).
• Samsung users: Tizen Studio (a free download from developer.samsung.com) - this IDE is required to deploy .wgt application packages to Tizen-based televisions.
• LG users: An LG Developer account (free registration at webostv.developer.lge.com) and the webOS CLI toolset installed on your computer.
• IPTV Smarters Pro app package - The .wgt file for Samsung Tizen or the .ipk file for LG webOS, which can be found on the official IPTV Smarters website.

Estimated time: The initial Samsung configuration typically takes 20-30 minutes. The LG process requires a comparable amount of time. After installation, the app is permanently on your TV, so you will not have to perform these steps again.

Installation Guide for Samsung Smart TV

Samsung televisions operate on Tizen OS, which has a built-in capacity for sideloading apps using its Developer Mode. This is how we will get the IPTV Smarters Pro Tizen version onto your screen. The feature is an official part of all Samsung Smart TVs and will not compromise your warranty. We've outlined the exact procedure below, which was confirmed on a Samsung QN85B (Tizen 6.5, 2022) for the best Samsung TV IPTV app 2026 results.

Part 1: Activating Developer Mode on Your Samsung TV

1. Press the Home button on your remote to access the Smart Hub on your Samsung TV.
2. Proceed to the Apps area within the Smart Hub.
3. While on the Apps screen, input the number sequence 12345 using your remote's on-screen keypad (or the physical number pad if available). This will trigger a Developer Mode pop-up.
4. Switch Developer Mode: ON and type in the local IP address of your PC (use ipconfig on Windows or find it in System Preferences › Network on a Mac). This authorizes your computer to install applications on the TV.
5. Select OK and power cycle your television as directed. Once it restarts, you will see a "Developer Mode" banner at the top of the Smart Hub, indicating it is enabled.

Part 2: Using Tizen Studio to Push the App

1. First, download and set up Tizen Studio from developer.samsung.com. Be sure to select the "IDE + CLI" package. The installation should take around 5 minutes.
2. Next, get the IPTV Smarters Pro .wgt file for Tizen from iptvsmarters.com (it's located in the Smart TV / Tizen download area).
3. Launch Tizen Studio. Navigate to Tools › Certificate Manager to generate a new Samsung certificate, which requires a free Samsung Developer account. This certificate is necessary to authorize the app package for Tizen.
4. From the Tizen Studio menu, open Tools › Device Manager. Select Remote Device Manager and then add your TV by providing its IP address (which you can find in TV Settings › General › Network › Network Status).
5. When your TV is shown as "Connected" in the Device Manager, right-click it and choose Permit to Install Apps.
6. Proceed to Tools › Package Manager, find the .wgt file you downloaded earlier, and select Install. The transfer will be complete in less than 30 seconds.
7. Press the Home button on the Samsung remote, open Apps, and navigate to the bottom. You will see IPTV Smarters Pro in the "My Apps" list. Launch it to begin.

Installation Guide for LG Smart TV

LG televisions are powered by webOS, an operating system that facilitates app sideloading via an official Developer Mode application. This LG webOS IPTV setup was verified by our team on an LG C2 OLED (webOS 22) and an LG NANO85 (webOS 6). The method is somewhat more direct than Samsung's, as LG makes its Developer Mode tool available right from the Content Store.

Part 1: Activating Developer Mode on Your LG TV

1. Begin by launching the LG Content Store on your LG TV (use the Home button to find and open it).
2. Perform a search for "Developer Mode" - this is an official tool from LG Electronics. Proceed to install it.
3. Run the Developer Mode application. You will need to log in with your LG Developer account (if you don't have one, you can register for free at webostv.developer.lge.com).
4. Set the Dev Mode Status: On and take note of the IP address shown for your TV. Your television will then reboot into Developer Mode.

Part 2: Using webOS CLI to Deploy the App

1. On your computer, install Node.js from nodejs.org if it's not already present, and then execute this command: npm install -g @webos-tools/cli
2. Download the IPTV Smarters Pro .ipk file designed for webOS from iptvsmarters.com.
3. Establish a connection to your TV via the terminal: ares-setup-device - you will be asked to provide your TV's IP address and choose "Developer" for the device type.
4. Deploy the application with this command: ares-install --device tv IPTVSmartersPro.ipk. Ensure "tv" matches the device name you configured in the last step. The process finishes in under 20 seconds.
5. On your LG TV, press the Home button and look through your app grid. IPTV Smarters Pro should be in the "My Apps" or "Recent" row. If you can't see it, check at the very end of your app list.
6. Key consideration for LG: The Developer Mode session on LG TVs has a 50-hour duration before it expires. This timer can be renewed in the Developer Mode app. The installed application itself is permanent; only the developer connection expires. You can simply relaunch the Developer Mode app and select "Extend" to reset the timer for another 50 hours if you need to.

For those who want to avoid sideloading, both Samsung and LG offer Smart IPTV as an alternative. This dedicated player is available for direct download in both the Samsung Tizen Store and the LG Content Store. It offers M3U and Xtream Codes support similar to Smarters Pro, although its user interface is less advanced. Our TiviMate vs IPTV Smarters Pro comparison provides a complete analysis of different IPTV player choices.

Connecting Your IPTV Service in Smarters Pro

After launching IPTV Smarters Pro on your Samsung or LG television, configuring your subscription takes less than two minutes. The application provides three distinct login options.

Option A: Xtream Codes API (Most Popular)

1. Launch the IPTV Smarters Pro application and choose Add New User.
2. Select the Login with Xtream Codes API option.
3. Input your service provider's Username, Password, and Server URL (these details are in your subscription activation email).
4. Click Add User. The app will automatically fetch your channels, VOD library, and EPG, which usually takes 30-60 seconds based on your plan's size.

Option B: M3U URL

1. From the Add User menu, pick Login with M3U URL.
2. Enter your M3U playlist link into the designated M3U URL box and assign a name to the profile.
3. You can also add an EPG (XMLTV) URL in the corresponding field to enable program guide information.
4. Select Add User to populate your channel list.

Solving Frequent Problems

Samsung: Developer Mode dialog doesn't appear after "12345" input

This issue can occur on older Samsung firmware versions or if you are not on the correct screen. Ensure you have navigated into the Apps section from the Smart Hub before entering the code. The number input must be done from within the Apps area, not the main Smart Hub screen. If the problem persists, try using the Samsung SmartThings mobile app as a remote to type 12345.

Tizen Studio displays "Connection Failed" when linking to TV

Verify that both your PC and television are on the exact same Wi-Fi network (e.g., not one on a 2.4 GHz band and the other on a 5 GHz band if they have different SSIDs). Also, double-check that you input the correct local IP of your PC in the Developer Mode settings. Make sure your Windows or macOS firewall is not obstructing Tizen Studio's access on port 26101.

LG: "Device not found" error from ares-install command

This error is almost always caused by an expired Developer Mode session (due to the 50-hour limit). Relaunch the Developer Mode app on your LG television and reactivate it. Afterwards, run the ares-setup-device command again if necessary before retrying the installation. It is also wise to confirm the TV's IP address hasn't changed; assigning a static IP to the TV in your router settings can prevent this.

Channels appear, but streams are buffering or not starting

The Wi-Fi performance of Smart TVs can be unreliable. For a major boost in streaming stability, connect your TV via Ethernet, as most Samsung and LG models include an RJ45 port. If a wired connection isn't feasible, try moving your router closer to the TV or upgrading to a Wi-Fi 6 router. For more comprehensive solutions, consult our tutorial on how to resolve IPTV buffering on any device. The official LG webOS support site also offers network diagnostics for LG TVs.

App vanishes from Smart Hub after a TV firmware update

System software updates on both Samsung and LG TVs can occasionally remove sideloaded applications. If IPTV Smarters Pro is gone after a TV update, you just need to repeat the sideloading procedure. Developer Mode typically stays active through updates, so you only have to execute the Tizen Studio installation or the ares-install command again. This subsequent process is much faster, taking less than 5 minutes.

BROWSE ALL TUTORIALS →